Big Papa Sportfishing Products Logo

Catering to the salmon & walleye fisherman  

Traxstech Accessories

Home Downriggers Rod Holders Bird Trees Rocket Launchers & Storage Planer Masts & Pulleys Cisco Products Electronics Mounts Traxstech Track Systems GL Holders

Search

Contact Us

horizontal rule

 

Up
Traxstech Tracks
Traxstech Downrigger Trolling Bar
Traxstech Accessories

   Made in USA

Some items are available in black or titanium for an additional cost (approx. 10%).  Please contact us for price & availability.

Track Insert


Made out of marine grade starboard; the finest material available that will not warp, crack, peel, or change its color. 

Comes in 6", 12", 18", 24", 36", 48", 60" & 72" lengths

The insert provides a clean surface when inserted into the mounting track that allows a combination of uses; acts as a step pad upon entering and exiting the boat,  also protects the inside of the track when fishing equipment is not in use, and transforms the boat back into a pleasure craft.

The inserts improved design utilizes a coated brass insert pressed into the starboard, ensuring a secure holding power, when snugging the screws to hold in place

RPIB-X

Drop shipped from Traxstech via UPS

SALE
6" $15.99
    14.71
12" $21.99   20.23
18" $24.99   22.99
24" $31.99   24.43
36" $41.99   38.63
48" $47.99   44.15
60" $61.99
   57.03
Quantity:
Length:
Shipping Method:

End Caps

Keep equipment secure from sliding out to and from your destination. 

For locking your equipment into any Traxstech mounting tracks

Comes in a set of 2 with stainless screws and allen wrench. 

MTEC-2

Drop shipped from Traxstech via UPS

SALE
$13.99  12.87
Quantity :
Shipping Method:

horizontal rule

Backing Plate

Available in 6", 12", 18" & 24" lengths.  Also available in 3" lengths for longer tracks.  Just place a 3" backing plate below each hole pattern.  (5 on 36" & 48" tracks)

For use with tracks that hold downriggers, including trolling bars, if the boat's hull is thin.  

Backing plates are usually not needed for longer tracks because the length of the track distributes the weight.  If necessary,  3" lengths can be placed below each hole pattern.  (5 on 36" & 48" tracks)

X-BP

Drop shipped from Traxstech via UPS

SALE
6"    $8.49       6.79
12"  $11.49   10.57
18"  $14.49   13.33
24"  $18.49   17.28
3"    $4.49        3.59
Quantity:
Length:
Shipping Method:

Net Holder

Looking to get your net off the floor? The Straight Mount Net Holder will do the job, with its all aluminum construction. This net holder offers an impressive 11" of height for securing long nets.

The new and improved Traxstech net holder is welded at the top and bottom of its 1/2" thick x 4 1/2" long base for strength and rigidity.

RRH-200

Drop shipped from Traxstech via UPS

SALE
$41.99  38.63
Quantity :
Shipping Method:
 

horizontal rule

Downrigger Ball Caddy

Ball Caddy secures canon ball into track next to your downrigger!

bulletSlides into any Traxstech track
bulletMolded ball caddy bolted onto a starboard base.

CB-140

Drop shipped from Traxstech via UPS

SALE
$21.99  18.49
Quantity :
Shipping Method:

Tall Weight Caddy
Torpedo Weight Caddy

For Torpedo & Shark/Fish Style Weights

CB-160

Drop shipped from Traxstech via UPS

SALE
$31.99  29.43
Quantity :
Shipping Method:

horizontal rule

Risers

Straight Riser Reverse Riser
               Straight Riser                         Reverse Riser

bulletAvailable in 4 1/2" & 6" tall.
bulletStraight riser - track mounted on top is same direction as base track
bulletReverse riser - track mounted on tope is perpendicular to base track

Straight - DRBS-4 or DRBRS6, Reverse - DRBRS-4 or DRBRS-6

Drop shipped from Traxstech via UPS

SALE
4.5" Straight $62.99  57.95
6" Straight $72.99  67.15
4.5" Reverse $72.99  67.15
6" Reverse $82.99  76.35
Quantity :
Direction:
Straight
Reverse
Height:
4 1/2"
6"
Shipping Method:

Pulley Retriever Kit

When using a planer board mast system, this pulley slides on to the line allowing for retrieval. This is an ideal safe way to add more clips to the planer board line. 

Pulleys can also be used on downrigger's for retrieving the cannon ball from water surface to boat. 

Features:

bulletMolded from lexan
bulletAll stainless steel hardware
bulletThese pulleys will offer you a LIFETIME of service.

Includes:

bulletone pulley
bulletone cleat
bullet15' coil of rope

RS-900-2

Drop shipped from Traxstech via UPS

SALE
$19.99  18.39
Quantity :
Shipping Method:

horizontal rule

Rail Mount Planer Reel
Currently Unavailable

Features:

bullet

This Lexan reel with an aluminum clamp will fit securely on a round rail. 

bullet

A pulley will allow the line to roll not rub

bullet150' of 200# high-strength mono-line with 375# snap swivel to attach your planer board
bulletFits round rails 5/8" thru 1-1/2" diameter OR
bulletFits round rails 1-1/4" thru 2" diameter

PR-2000 / PR-3000

Drop shipped from Traxstech via UPS

SALE
5/8"-1 1/2"  Diameter Rail
 $119.99  110.39
1 1/4"-2" Diameter Rail $129.99        119.59
Quantity:
Size:
Mounting (Rail direction):
Shipping Method:
 

Planer Reel Replacement Line

150' of 200# high-strength mono-line with 375# snap swivel

PRRL-150

Drop shipped from Traxstech via UPS

SALE
$24.99   19.99
 
Quantity:
Shipping Method:

horizontal rule

Swivel Downrigger Base

Removable swivel base for mounting your downrigger's; allowing you the flexibility and mobility that the Traxstech system offers.

Features:

bullet3 riser heights - 3", 4.5" & 6"
bulletEntire assembly height is approx. 1.75" more 
bullet3/4" thick aluminum top plate that is pre-drilled and tapped for the mounting of your downrigger
bullet3/8" diameter stainless steel plunger insures positive locking strength in the 12 available positions to swivel every 30 degrees
bulletAll aluminum construction and stainless steel components
bulletSmoothest swivel action
bulletStrongest construction available
bulletFits most popular downrigger brands - Cannon, Fishlander, Big Jon, Scotty, Penn and Walker

Small boat with narrow gunwales?  Use base with 6" track & attach to bench seat.

SB-X

Drop shipped from Traxstech via UPS

SALE
3"     $102.99  
  94.75
4.5"  $108.99   100.27
6"     $119.99
   110.39
Quantity:
Height:
Shipping Method:

Non-Swivel Downrigger Mounting Base

Removable non-swivel base for mounting your downrigger's; allowing you the flexibility and mobility that the Traxstech system offers.

Features:

bullet2 riser heights - 3" & 6"
bulletEntire assembly height is approx. 1.75" more 
bullet3/4" thick aluminum top plate that is pre-drilled and tapped for the mounting of your downrigger directly or with a swivel base
bullet3/8" thick bottom plate that slides into any track length Traxstech offers
bulletAll aluminum construction
bulletStrongest construction available
bulletFits most popular downrigger brands - Cannon, Fishlander, Big Jon, Scotty, Penn and Walkers

There is a specific model for Scotty downriggers.

PM-X & PMXSCO

Drop shipped from Traxstech via UPS

 
3"    $72.99  67.15
6"    $82.99  76.35
2.5" Low Profile $72.99  67.15
Quantity:
Height:
Shipping Method:
Scotty 6"    $82.99  76.35
Scotty 2.5" Lo Prof $72.99  67.15
Quantity:
Height:
Shipping Method:

horizontal rule

Mounting Base (Non-Swivel) for Big Jon* Pedestal Mount Rod Holders
Big Jon Rod Holder Base

Removable non-swivel base for mounting your Big Jon* pedestal mount rod holders

Features:

bullet3" riser height
bulletAll aluminum construction
bullet45° of side to side rotation so you can turn the entire set-up and point the rods out and back for better use when running planer boards

*Fits all brand multiple rod holders with a 4” x 4” base and a mounting hole pattern of 3-1/4” square.

BJBA-3

Drop shipped from Traxstech via UPS


SALE
3"  for Big Jon Rod Holders $44.99  41.39
Quantity:
Shipping Method:

horizontal rule

Angled T-Bolt Mounting Bracket
Traxstech T-Bolt Mounting Bracket  Traxstech T-Bolt Mounting Bracket Application

Utilizes the boat manufactured gunwale track to mount Traxstech tracks.

Track sold separately

Features:

bulletHeavy duty aluminum bracket with stainless steel screw, washer & T-slot nut
bulletYou can gain access to the track slot to slide the t-nut into by removing the back corner boat caps or you may need to cut a way a 1” section of the bottom lip of the track.
bullet2 Brackets per pack
bulletTrack must be added.  Any length track offered by Traxstech can be used with these brackets, but 18" or longer track recommended for downriggers to spread the weight out. 
bulletOne bracket per set of mounting holes is recommended for optimum strength
Track length Number of brackets
6" 2
12" 3
18" 3
24" 4
36" 5
48" 5
60" 7
72" 8

Choose your angle from the chart below

 
45 degrees 50 degrees 58 degrees 90 degrees
War Eagle Lund Polar Craft Lund
      Tracker Grizzly

TBM-XX

Drop shipped from Traxstech via UPS

SALE
Set of 2  $35.00   32.20
Quantity:
Angle:
Shipping Method:

Alumacraft Mounting Bracket
 Alumacraft Bracket

Bracket to fit the manufactured track on the Alumacraft boat gunwales. 

Track sold separately

Features:

bulletHeavy duty aluminum bracket
bulletThis bracket will fit in Alumacraft track system and allow the Traxstech Mounting track to mount on top allowing Traxstech fishing products to slide in
bullet2 Brackets per pack
bulletTrack must be added.  Any length track offered by Traxstech can be used with these brackets, but 18" or longer track recommended for downriggers to spread the weight out. 
bulletOne bracket per set of mounting holes is recommended for optimum strength
Track length Number of brackets
6" 2
12" 3
18" 3
24" 4
36" 5
48" 5
60" 7
72" 8

ACB-250

Drop shipped from Traxstech via UPS

SALE
Set of 2  $64.99  
59.79
Quantity:
Shipping Method:

horizontal rule

Gimbal Mount

Traxstech 30 Degree Gimbal Mount Traxstech 90 degree Gimbal Mount
30 Degree 90 Degree

Designed to work in conjunction with an existing flush mount.

Traxstech's pre-drilled and tapped Gimbal Mounts allow easy installation of Cannon, Fishlander, Big Jon, Scotty, Penn and Walker downriggers.

The uniqueness of adapting fishing equipment to a gimbal mount allows an easy installation. When not in use; it can be removed to return the boat to its original condition.

 
bullet30 degree 1 1/2" dia. x 10 1/2" long tube for boats 30' & under that are equipped with factory installed flush mounts.  The most popular size.  Tube 10" long
bullet30 deg. 1 3/4" dia. x 13 1/2 long tube for boats 30' & over with larger style flush mounts. Tube is 13" long.
bullet90 degree for boats with a narrow gunwale or transom. 1 1/2" tube or 1 3/4" tube.
bullet1 1/2" tube is 10" long
bullet1 3/4" tube is 13" long

Please reference your boat's owners manual if you're unsure about the angle of the flush mounts.

Traxstech Gimbal Mount with track
Also available with 18" top track
on angled gimbal mounts.  The added feature of a track on the gimbal offers an expanded area that can be used for rod holders, downrigger mounts or other accessories when fishing multiple set ups.

GM-100 / STGM-100

Drop shipped from Traxstech via UPS

SALE
30 Deg 1 1/2" $74.99 68.99
Quantity:

SALE
30 Deg 1 3/4" $104.99  96.59
Quantity:

SALE
90 Deg 1 1/2" $82.99  76.35
Quantity:

SALE
90 Deg 1 3/4" $104.99  96.59
Quantity:


Gimbal Mount w/18" Track
SALE
30 Deg 1 1/2" w/18" Track $104.99  96.59
Quantity:

SALE
30 Deg 1 3/4" w/18" track $134.99  124. 19
Quantity:

Rod Holder Replacement Caps

Rod Holder Caps

 

bulletAn economy replacement cap to be used on all tube type rod holders that have a 2” dia. tube x 1/8” wall.
bulletSold in packs of 2

C-500-2

Drop shipped from Traxstech via UPS


SALE
$7.49 per pack of 2  6.89
Number of Packs :
Shipping Method:

 

horizontal rule

Rod Holder Adapter Plate

Allows other brand rod holders, such as, Cabelas, and Scotty deck mounts and Down-East S-17 Salty, to be mounted and used in the Traxstech track system.

To allow additional flexibility the following mounting patterns have been added:

bulletTite-Loc 2" x 2" Mounting Base
bulletLuhr-Jensen Speed Indicator mounting base
bulletVectors Single, Double and Triple rod holders
bulletAnglers Pal rod holder and multi mount base plate

Adapter plate comes with stainless steel hardware and thumbscrew

A-600-6

Drop shipped from Traxstech via UPS

SALE
$25.99   23.91
Quantity :
Shipping Method:

Adjustable Position Cleat

Adjustable Position Cleat (CP-06) is great for attaching an extra boat fender, dock line or trolling bag.

bullet6" Chrome Plated Zinc Cleat
bullet6" Long Aluminum Base
bulletSlides into any Traxstech track

CP-06

Drop shipped from Traxstech via UPS

SALE
$29.99  27.59
Quantity :
Shipping Method:

horizontal rule

C-Clamp Mounting Base without or with Salty S-17PC Rod Holder
C-Clamp Mounting Base  C-Clamp w/Salty

Base for Salty & Folbe deck mount base rod holders 

bullet5" high
bulletThe height of his unit allows for the rod tips to be right next to the boat ( in the water) while musky fishing
bullet Keeps the rod handle waist high when laid flat out to the side trolling divers, fish disks or flat lining
bullet Will keep the butt of the rod closer (out of the way) to your gunwale if pointing the rod tips toward the sky while using with planer boards
bullet The oval base provides 45 degree of side-to-side rotation
bullet All aluminum heavy duty construction; back side of block also has pattern drilled and tapped to accommodate Scotty & Folbe deck mount type bases

Mounting track is sold separate

RRH-400 / RRH-400-17

Drop shipped from Traxstech via UPS

C-Clamp without Rod Holder SALE
$41.99  38.63
Quantity:

SALE
C-Clamp with Salty S-17PC Rod Holder  
$87.99  80.95
Quantity:

Tall C-Clamp Mounting Base without or with Salty S-17PC Rod Holder
 

Tall C-Clamp Mounting BaseTall C-Clamp Base w/Salty Rod Holder
Rod holder not included

Tall base for Salty & Folbe deck mount base rod holders 

bullet13" high
bullet Will keep the butt of the rod closer (out of the way) to your gunwale if pointing the rod tips toward the sky while using with planer boards
bullet The oval base provides 45 degree of side-to-side rotation
bullet All aluminum heavy duty construction; back side of block also has pattern drilled and tapped to accommodate Scotty & Folbe deck mount type bases

RRH-400T/ RRH-400T-17

Drop shipped from Traxstech via UPS

SALE
Tall C-Clamp without Rod Holder
 
$51.99 47.83
Quantity:

SALE
Tall C-Clamp with Salty S-17PC Rod Holder  
$104.99 96.59
Quantity:

horizontal rule

Ball Mount Adapter Plate


Ball Mount Adapter Plate
Ball mount not included

Features:

bulletThis adapter plate features a 1/2" thick x 4-1/2" long aluminum base with two mounting patterns drilled & tapped.
bulletAccommodates the Ram® electronics ball mount  OR
bulletAdjustable antenna bracket so you can slide your antenna assemble right into the track.

A-450

Drop shipped from Traxstech via UPS

SALE
$19.99   18.39
Quantity :
Shipping Method:

Planer Board Caddy

Planer Board Caddy 

bullet9'' tall and holds up to 4 Walleye planer boards, lures, fish towels etc..
bulletSlides into mounting track

 

 

PBC-900

Drop shipped from Traxstech via UPS

SALE
$74.99   68.99
Quantity :
Shipping Method:




horizontal rule

Thumb Screws

Features:

bulletStar design allows better finger grip for tightening or loosening.  
bulletThis design also has an opening in the top of the Star for dropping an allen wrench into and tightening directly on the stainless steel screw.
bulletMade from super tough nylon with 1/4 - 20 stainless steel screw. 
bulletComes with 7/8" long (Short) & 1 1/8" long (Long) screw
bulletPackage quantity of 4

T-520-4 & T-520-4L

Drop shipped from Traxstech via UPS

SALE
Short $7.99  7.35
Long $8.99  8.27
Quantity :
Length:
Shipping Method:

Universal Bracket

This bracket was designed to clamp or bolt hand liner reels to, helping protect the boats exterior. 

River trollers find it easier to fish with the reel hanging securely over the side of the boat.

When not using, the bracket simply slides out of the track. 

The bracket has since been used for many other mounting options including downrigger's on small boats, barbeque grills, lanterns, fish finders and aqua views, just to name a few.

The bracket measures 3" tall and 12" arm.

RWL-100

Drop shipped from Traxstech via UPS

SALE
$59.99   55.10
Quantity :
Shipping Method:

 

horizontal rule

Tool & Beverage Holder

Conveniently keeps tools, lures, beverage, etc. organized & handy.

Slides into any Traxstech track.

TH-100 Combo

Drop shipped from Traxstech via UPS

SALE
$72.99   67.15
Quantity :
Shipping Method:
 

Beverage Holder

Keeps beverage secure & close at hand.

Slides into any Traxstech track.

BH-100

Drop shipped from Traxstech via UPS

SALE
$25.99  23.91
Quantity :
Shipping Method:

horizontal rule

Vertical Mount Beverage Holder

Traxstech Vertical Mount Beverage Holder

Beverage holder to fit on Tool holder and Vertical bird tree

BH-100V

Drop shipped from Traxstech via UPS

SALE
$31.99   29.43
Quantity :
Shipping Method:




Tool Holder

Conveniently keeps tools, lures, etc. organized & handy.

Slides into any Traxstech track.

TH-100

Drop shipped from Traxstech via UPS

SALE
$49.99   45.99
Quantity :
Shipping Method:
 

horizontal rule

Rail Clamps

Round Rail Clamp Square Rail Clamp Rail Clamps w/18" track
      Round Rail                    Square Rail             w/18" Track

Great for mounting rod holders, tool holders, grills, etc.

Features:

bulletComes in 3 sizes:
bulletFits round rails 5/8" thru 1-1/2" diameter OR
bulletFits round rails 1-1/4" thru 2" diameter OR
bulletFits 1" thru 1-1/4" square rails
bulletHolds 6" thru 48" tracks
bulletComes in Packs of 2

The Diverse use of Traxstech rail clamps allows the expansion of your system by moving rod holders forward to a bow rail or up the gunwale on a rail midship.

The removability of this mounting system allows the avid fisherman to return his boat back into a pleasure craft.

Can by used in both a horizontal or vertical position.

RM-700 / RM-800

Drop shipped from Traxstech via UPS

Round 5/8"-1 1/2"  Diameter Rail - Pack of 2
SALE
$31.99  29.43
Quantity :
Round 1 1/4"- 2" Diameter Rail - Pack of 2
SALE
$39.99 36.79
Quantity :

Square 1 1/4" Rail - Pack of 2
SALE
$31.99   29.43
Quantity :
 
Bimini Top Plate/Luhr Jensen Speed Adapter Plate

Bimini Top Plate


This compact mounting plate has two hole patterns drilled and tapped to allow your bimini top bracket to be removed from your boat. This allows you to mount a longer piece of track and still use your bimini top, but now the bracket can slide into our track.

bulletCurrently drilled for two of the most popular brackets.
bulletLuhr Jensen speed adapter plate also mounts on this plate

LSA-100

Drop shipped from Traxstech via UPS


SALE

$14.99   13.79
Quantity :
Shipping Method:

 

horizontal rule